Miata Radio Plate modified for Yatour BT Adapter

SummaryThis is a modification to the Mazda Mx-5 Stock Radio front plate made to host a Yatour Bluetooth and Digital Audio adapter. I Remixed a Yatour car support made by mento, keeping the front opening, which was too hard for me to design, and adapted it to the front plate which I designed from scratch.Printed in ABS in order to stand high temperatures thad build up on the dashboard.I Used a large raft when printing the first prototype, to help the piece stick to the print bed.In the final vesion I used hairspray, which helped a lot.I had some warping, nevertheless, which helped, however, to give the piece that even so slight convexity shown by the original item.Print SettingsPrinter: CTC Prusa I3 Pro B Mk8 Rafts: Doesn't Matter Supports: No Resolution: 0.1 Infill: 20% Filament: Feel Color ABS Black Notes: Extruder Temperature: 240°CBed Temperature: 80°C - This was a mistake. Choose a way higher bed temperatue. Use a raft or hairspray to help the object stick firmly to the bed. Warping ahead!Post-PrintingSanding and painting Paper sand with Increasingly higher sandpaper grits.Start with 100grit, ended with 800 grit paper.Prepare with 2 coats of primer.Paint with 4 coats of Acetone-based matte black spray paint.