BMW E30 Glovebox Handle E21 E28 E24 E23

Community-made, untested by us. Check fit and material before you install — print at your own risk. See our Terms.
Glovebox handle repair part. This is the handle only that attaches to the original latching mechanism. Version WITHOUT the lock. OEM 51161848873 ______________ Attaches using two M4 screws. Accomodates a generic spring. The spring is not absolutely necessary. Unfortunately, I dont have the original spring in order to measure it. There is an opening in the back which accomodates a 5x16 shaft (the same one as used on prusa printers such as MK2, MMU2 Idler etc.). This shaft is crucial as a metal element slides on it. If printed from plastic only, it would wear down quickly. Ask me how I know :D After a lot of trial and error, the shaft is positioned at an angle to mitigate mechanism wear, compared to the original bmw part. The shaft is a tight fit and has to be pressed / hammered in. I am using needle-nose pliers to press it in. Lubricate the mechanism before assembly ;) The other part of the mechanism can be bought from Aliexpress, as well as the handle version intended to be used with the lock.
Similar Parts

DIFFERENTIAL RATIO MEASUREMENT TOOL FOR BMW E30 AND OTHERS
May 17
Bmw E30\E28\E21 - wiring clip (OEM: 63 12 1 364 431, 61 13 1 362 825)
May 17
Bmw E30\E28\E21 - door lock knob sleeve (OEM: 51 41 1 911 964, 51 21 1 852 140)
May 17