Miata NA - Side mirrors - Acorn style
**Here's my take on a bullet/acorn style mirror** It was designed to take an universal 95mm bike mirror, be somewhat adjustable, no visible screws, and require only a change of the base to fit another car. The passenger side has more angle, but I've made the change as subtle as possible. You will not be able to see the quarter panel, but it's not far off. **This model fits the NA Miata, and has files for both LHD and RHD** There are optional files for a 10mm shorter leg, as well as a base and leg that can take a CNC Kitchen threaded insert. --- Here's what you need: Mirrors 95mm: [AliExpress](https://www.aliexpress.com/item/1005006778895579.html) If the listing is invalid, you can check the seller page here: [AliExpress](https://www.aliexpress.com/store/1103270414) Mounting screws (Preferrable hex round heads): - 4x M6x30 (Base to door) - 4x M5x10 (Leg to base) - 4x M4x15 (Housing to leg) - 6x M3x15 (Adapter to cap) - 2x M8x20 (Endcap to housing) Tools: - Long ball end hex keys. --- Here's how you install it (See GIF for visual guide): - Run through all the threads with a screw before mounting. - Mount the base to the door (M6 screws). - Mount the leg to the base (M5 screws). - Mount the housing to the leg (M4 screws). - Mount cap on the adapter ring (M3 screws). - Mount mirror in the adapter ring/cap combo with included screw. - Insert mirror part in the slots in the housing, and make the screws barely snug. - Get in the car and adjust the mirror. Then tighten the M3 screws. - Mount the endcap to the housing (M8 screw)
