Shift Boot Retainer for 9th Gen Honda Civic SI

SummaryThis is the clip to hold up the shift boot on a 9th Generation Honda Civic SI (2011-2015).PLEASE SEE PRINT INSTRUCTIONSUPDATE July 8, 2020: By request I've added a version with two catches instead of four. The one with four is really quite difficult to remove once it is clipped on (Which I see as a good thing?), the one with two should be easierIf this thing is useful to you, consider a tip and/or post a make!Print SettingsPrinter Brand: AnycubicPrinter: All-metal MegaRafts: NoSupports: YesResolution: 0.1Infill: 25%Filament: Creality PLA (Black) Notes: I ended up printing it sideways (orientation shown in the STL file) because otherwise the pieces that flex end up flexing in the direction of the layer lines, and they will break very easily. Printing it sideways definitely leads to internal supports that can be difficult to remove, but I did manage to get a functional part that way.I printed in PLA. I know people generally frown on PLA in a part that is used in a car, but I live in Canada. Not overly hot, so I thought I'd give it a try. If it fails, I'll print another in a more heat resistant material.