Jeep Wrangler JL MagSafe Mount
Boost MeFeel free to give the model a boost if you enjoy it!Jeep Wrangler JL MagSafe HolderThis MagSafe holder was specifically designed to fit the Jeep Wrangler JL (2018-present)There are 4 different print profiles to fit 5 different types of MagSafe chargers:Apple 25w MagSafe charger (Newer Model-Released November 2024)Apple 15w MagSafe Charger (Older Model- Pre November 2024)Amazon-Threekey MagSafe ChargerAmazon-TNDAJI MagSafe ChargerAmazon- WRVVR MagSafe Charger (same size as Apple 15w MagSafe charger)(Not affiliate links)There is a simple way to see what kind of Apple MagSafe charger you have by looking at the picture belowEach print profile has a high quality or standard quality option. The high quality option takes almost double the time to print, however, it looks very nice and smooth. Each print profile also has a test fit print to make sure your MagSafe charger will fit properly without having the print the whole model. Due to the odd shape of the model, and to minimize the use of supports, I found the best way to print is to split the model into two parts that will require you to super glue or plastic weld the two pieces together. I did use snap in connectors to join the two pieces to help aid the joining process. Due to the high temperatures the inside a vehicle can reach, I highly recommend printing this in PETG and not PLA. PETG has higher heat resistance and PLA will deform much easier in the heat of a vehicle What You Will Need For Installation:10mm socketAutomotive trim removal tools (highly recommended to reduce the chances of scratching the trim piece)Installation Instructions: (Video Below)Remove trim piece with trim removal toolsIt will most likely be difficult to remove the trim for the first time if it has never been removed. Just take your time and pull slowlyLoosen the bolt with the 10mm socketInstall MagSafe mount behind bolt and grab handleTighten bolt back downReinstall trim pieceThe left side (ignition side) goes in first and then press in the whole piece
