ND MX-5 Miata Front Mud Flap V2

(Update 2: I've changed the license to public domain as I don't really care to control others wanting to sell or modify it.)(Update 1, for V2: This version extends the lower edge by 17mm for improved coverage. Thanks to @one_arm_scissor for initial feedback on version 1.) This is a simple mud flap designed for the 2015-current model ND Miata MX-5. It utilizes the 3 plastic clips that attach the fender liner to the body. It's minimal but does the job of keeping a lot of road debris off the side of the car, even with 225 width tires. Simply remove the clips with a screwdriver (pry out the center first, then perimeter), line up the mudflap and reattach. There is enough slop in the clip that it should hold the extra thickness without any problems. The larger diameter clip goes on the bottom. The model size is maximized for the 256x256mm beds of the A1, P1S, X1C, etc. This is the driver side (left) model. Just mirror the model for the passenger (right) side. I've used PLA for this model without any issues. After cracking one in autocross (I hit a cone so hard my entire side step moulding came off), I changed to ASA but almost any material will do fine. For cars with the Club side skirts, you might also need some longer clips. Feel free to remix this for your needs, especially if you have a larger print bed. Enjoy!