FRONT LIP FOR NBfl MIATA

Mazdaspeed-style lip for the NBfl (NB2) Miata. Fitment on NB1 has not been tested. The model is divided into 8 parts that you can print separately and then glue or weld. On the bottom, you can use adhesive or screws to mount it to the car. On top, I recommend a few dabs of polyurethane glue at the corners. If you want to use double sided tape, there are supports (spacers) you can print and glue inside the top parts of lip (support_exhaust_side.stl and support_intake_side.stl). Good fitment might require light sanding in areas around fog lights. I recommend drilling some holes on the bottom of the lip to drain the rainwater.