PTFE Lid for cereal box - dry box
As you can see in the photos, I achieved excellent results. If you get poor results, please check your filament and settings before leaving negative feedback. Issues are often caused by old or damp filament, a poorly calibrated printer, etc.Boost MeIf you like my model, click on 'Boost Me'Caution: This model is designed for PTFE Connectors PC4-M10.If you need a PC4-M6, you will need this model:https://makerworld.com/en/models/1085540#profileId-1078259 This model allows stacking the boxes without being obstructed by the PC4_M10 connector. This model allows for storing filament spools and printing without removing the spools from the airtight boxes. If you need a cap for the PTF Connector, check here: https://makerworld.com/en/models/724494#profileId-655640 The cereal box I use is this one:https://www.amazon.fr/Wildone-conservation-hermétiques-céréales-aliments/dp/B07L2QJ5LB/ref=sr_1_4?keywords=Wildone%2B–%2BEnsemble%2Bde%2B6%2Brécipients%2Bhermétiques&qid=1708091397&sr=8-4&th=1 Printed with Transparent PETG but you can use the filament of your choice. The model is the perfect companion for:https://makerworld.com/en/models/526647#profileId-443606or this one: https://makerworld.com/en/models/529192#profileId-446317 To ensure that the connector is screwed in properly without damaging the threading, it is advisable to deburr thoroughly using a deburring tool. I bought these items from AliExpress:PTFE Tube:https://www.aliexpress.com/item/1005001976975889.html?spm=a2g0o.order_list.order_list_main.41.266e1802jObvl6PC4-M10:https://www.aliexpress.com/item/1005005646746144.html?spm=a2g0o.order_list.order_list_main.46.324d18022AxtWT
