Miata Hardtop Rear latch plate rubber
Submitted bydsalami
SourceMakerWorld
Date indexed5/21/2026
View on MakerWorld →
Community-made, untested by us. Check fit and material before you install — print at your own risk. See our Terms.
I made this model because the plastic on my rear latch plate had worn down to the metal. Installation:Remove the old plastic (cut it off at the top of the holes).After printing, cut the 4 posts in the middle where indicated in the STL/3MF file.Place the printed part onto the metal bracket.Optional: use glue for a tighter fit (not required).
