NC MX-5 Miata USB C Port Aux Replacement

This adapter was done in two pieces. You need to print both, and then put two M3 x 5.7mm brass heat inserts into the long pieceUse two M3 x 8mm screws to secure the long piece to the bracket, take a look at the images to see exactly how they fit up.Put this specific USB-C adapter (the mold they use might change with time and cause it to not fit) (affiliate link): https://amzn.to/3EErIzM into the long piece, and when the port is flush with the print, screw two M3 x 14mm screws through the holes at the end of the long piece. This will cut small threads into the rubber of the port housing to hold it in place.