V2 Starline Cupholder + V2 Bracket

This model is completely free but if you'd like to support me my Kofi is https://ko-fi.com/riggittappV2 Bracket now released, using incorporated countersinks and screw holes, eliminating the need for any drilling. Installation should be fairly simple. but I'll still be uploading a video with updated instructions. some instructions have changed, so please read CAREFULLYI was unhappy with the options available as far as cupholders go and decided I needed to make my own.I've got a video up on YouTube as an installation guide for the V1**, but rest assured it's pretty simple to install, and completely NON-DESTRUCTIVEalso, I would prefer if you posted any variations here on maker world to keep everything in one place.PLEASE PLEASE PLEASE DOUBLE CHECK PRINT PROFILES AND SETTINGS. I'M NOT A GENIUS AND YOU'LL LIKELY HAVE TO USE SOME OF YOUR OWN SETTINGS AND METHODS WHEN PRINTING.PARTS LIST1kg PETG, ASA, ABSit's more like 700-800g but get a whole roll for testing.Pla could probably be used in colder climates. 6-gauge drywall/wood screws fine thread V2 ONLY2in 4 pcs. (bracket + big cupholder)1⅝ in 2pcs. (small cupholder)could use coarse of fine threads, I used fine and it turned out okay. Mini Right-Angle Ratchet/Screwdriverfor threading the screw inside the cupholder into the bracket.OPTIONAL RIGHT-ANGLE ADAPTER FOR DRILLwill save a hell of a lot of time threading the screws in the cupholders.6-gauge drywall/wood screws**2¼ in 2-4 pcs.2in 2 pcs.1⅝ in 2pcs. Drill/Impact/Driver**Any will do, so long as it can drive a screw into plastic. Drill/Impact/Driver Bits**5/64th bit for screw pilot holes.3/8 or 1/2 bit for countersink in the bracket.Phillips bit.ONLY FOR V1 BRACKET**