7th Gen Honda Accord 5-Speed Manual Shift Knob
Community-made, untested by us. Check fit and material before you install — print at your own risk. See our Terms.
I wanted a more interesting version of the stock shift knob of my Accord, so I designed my own. It used ~47.5g (~15.5m) of material.Designed explicitly for the 7th gen Accord, but the knob itself has a M10x1.5 screw tap if you want to use it on something else. Regular PLA is NOT recommended, I used PETG, but other high-temperature materials such as ASA should work too. Slicing instructions:<0.12mm resolution recommended>30% "Gyroid" infill Seam position: BackSupports: Normal auto & SnugBrim: I used a Supertack plate and a 10mm brim on the knob and 7.5mm brim on the lower piece worked wellAssembly:Remove supports and brims from modelRemove stock knob (pull down on boot then unscrew the knob)Slide down lower piece all the way (make sure the seam faces away from you for best aesthetics)Screw on new knob until tight and seamless
