Jeep Wrangler JK Roof Console Switch Panel

Custom overhead switch panel designed for the interior of the Jeep Wrangler JK. This panel allows you to install up to 6 switches for controlling auxiliary equipment such as: off-road lightslight barscompressorsradioswinchesother accessories The design keeps the interior clean while placing the controls in an easy-to-reach location above the windshield. Modular Design The model consists of two separate parts: Main housingFront switch panel The front panel is fully customizable.You can easily modify it to fit your own needs: different switchesUSB portsvoltmeterscustom button layoutsadditional electronics Simply edit the front plate in CAD and adapt the holes to your preferred components. Mounting The front panel is attached to the main body using M3 heat-set inserts and M3 screws. Recommended hardware: M3 heat-set threaded insertsM3 screws The main housing is mounted to the Jeep overhead console using automotive sealant.This provides a strong hold while avoiding permanent modifications to the interior. Wiring Wiring is routed cleanly through the interior: Wires pass through the hole in the switch panel housingThey should be placed in protective wire sleevingThe wiring then routes into the factory opening near the rear-view mirror, where other wires already pass This keeps the installation neat and hidden. Recommended Print Materials Because car interiors can reach high temperatures, it is recommended to print using: ASAABSASA-CFNylon (PA) PLA is not recommended for automotive interiors.Boost Meoost if you like the design or plan to use it. It helps the model show up in search so more JK owners can find a clean switch solution. Thanks for the support!